|
PMC Series ISO Air Cylinders 32 mm through 200 mm bore
- Strokes to order - dimensions to ISO/VDMA standards for
interchangeability - Choice of tie rod or smooth profile construction -
Hard anodised aluminium barrel for long service life - Medium carbon steel
rod hard chromed for scratch resistance - Magnetic piston for piston
position sensing - Robust ISO standard steel and cast iron mountings -
Non-lube operation for cleaner environment - Optional rod guides for
applications involving torque and radial load on the piston rod. |
 |
| Truck Tailgate Cylinder |
 |
|
Series 2A Heavy
Duty NFPA Air Cylinders
- 1” through 14” bore sizes -
Strokes to order - Dimensions to NFPA standard for interchangeability -
Hard chromed and honed steel barrel for long service life - Induction
hardened, hard chromed and polished rod for impact resistance - Robust
NFPA standard steel mountings and steel end caps for durability - Optional
non-lube operation for cleaner environment - Wide range of optional rod
diameters to suit most applications -
High yield steel tie rods and alloy steel tie rod nuts for extra strength. |
 |
|
P1A Series Mini
ISO Air Cylinders
- 10 mm through 25 mm bore sizes -
10 mm through 500 mm standard strokes - Dimensions to ISO standard for
interchangeability - Smooth external surfaces to prevent build up of grime
and to facilitate easy cleaning - Stainless steel barrel and rod for long
service life - Magnetic piston for piston position sensing - Choice of
double acting, single acting spring retract and single acting spring
extend types - Choice of standard, high and low temperature service
cylinders -
Non-lube operation for cleaner environment. |
 |
|
Midget Series
BrassAir Cylinders
- 1” bore size; strokes to order -
All brass and stainless steel construction for corrosion resistance and
heavy duty service - Choice of double acting, single acting spring retract
and single acting spring extend types
- Integral rear trunnion and threaded neck mountings for extra strength. |
 |
|
P10S SeriesAir
Cylinders
- 12 mm through 100mm bore sizes -
5 mm through 100 mm standard strokes - Compliance with JIS B 8368 standard
- Interchangeability with similar cylinders offered by Asian manufacturers
- Compact dimensions for space saving - Wide range of mountings for
designers' and users' convenience - Magnetic piston for piston position
sensing -Rugged construction for arduous conditions -
Non-lube operation for cleaner environment. |
 |
|
P1R & P1Z
Series RodlessAir Cylinders
P1R: Mechanical piston-to-carriage
connection - 16 mm through 63 mm bore sizes - Strokes to order up to 7000
mm - Compared with a conventional cylinder, the overall length is reduced
to only slightly more than half - Optional “both ports in one end cap”
type cylinders for more space saving and easier piping - Hard anodised
aluminium barrel for long service life - Magnetic piston for piston
position sensing - Wide range of carriage options to cater for most
requirements - Non-lube operation for cleaner environment.
P1Z:Magnetic piston-to-carriage
connection - 16 mm through 32 mm bore sizes -
Strokes to order up to 2000 mm. |
 |
|
Air Bellows
- 70 mm through 660 mm diameters -
up to 375 mm standard strokes - Compact dimensions for space saving -
Virtually frictionless operation for compressed air and energy saving -
Tolerance for axial and angular misalignment allows use where conventional
cylinders are unsuitable - Non-lube operation for cleaner environment. |
 |
|
PRO - PRN
Miniature RotaryActuators
- 0.16 Nm through 247 Nm output
torque at 6 bar air pressure - Single or double vane construction - High
torque-to-weight ratios - Uniform torque in both directions - Optional
position sensors to provide accurate feed back - Optional hydraulic
cushion for high torque units -
Non-lube operation for cleaner environment. |
 |