Cylinder Speed Controls and other Accessories

- Air Flow Controls: M5 through G1/2 sizes - Hand, screw driver, Allen key or micrometer adjustment - Quick exhaust valves: G1/4 though G3/4 sizes. For increasing cylinder velocity - Exhaust Silencers: M5 through G1 sizes - Porous polythene, glass fibre and sintered bronze elements - Impulse Generators: For converting a maintained pneumatic signal into a single impulse of short duration.

Push-in Instant Fittings and Tubing

Engineering polymer push-in instant connection fittings for use on compressed air lines - M5 though G1/2 threaded connections - 4mm through 12mm push-in connections - Wide range of straight, tee, elbow, banjo and manifold type connectors - Whilst the tube is positively held against the disconnection, it is allowed to rotate within the fitting - Tubes in 4mm though 12mm outside diameters - In urethane and other polymers - In several colours.

Factory Automation Equipment

- Automation units are designed to enable pick and place and other manipulation systems to be built from a range of modular products - Accurate linear and rotary modules can be combined with grippers and vacuum handling units to provide special purpose robots simply and quickly -The modular design facilitates the reconfiguring of systems should the requirements change.

Vacuum Generators, Valves and Cups

- For lifting and transporting items with flat or curved surfaces; with horizontal through vertical faces - Wide range of compressed air driven vacuum generators - Flat and bellows type vacuum cups; in nitrile, urethane and silicone - Up to 300 mm diameter vacuum cups to generate lifitng forces up to 2600 N - Special cups for use on bowed, porous, rough, wet/oily, surfaces and soft or thin components - Cups for high temperature (up to +250°C) and low temperature ( down to -60°C) applications - Control valves to maximise safety and minimise compressed air consumption.